Cellink NEO 80+S Dash Cam 7,800mAh Powerbank Battery Pack Extended Parking Mode
CELLINK NEO 80+S
Smart Power Control with LiFePO4 Technology
The Ultimate Supplementary Dash Cam Power Source
This Cellink Neo 80+s 100Wh is Cellink’s latest dashcam power bank. It has been specially designed to allow you to use your dashcam’s parking mode without draining the car’s battery. The Neo80+s has a capacity of 100Wh and, thanks to its slim design, can be neatly concealed in almost any car. It is also equipped with Bluetooth, allowing you to easily connect via your phone to view the remaining capacity and other information.
The Cellink Neo 80+s comes with all the necessary accessories to have it professionally installed and integrated into the vehicle. The Cellink Neo 80+s 100Wh is made from durable materials and has a sturdy aluminium casing that can withstand knocks and temperature fluctuations. This Cellink Neo 80+s is the universal alternative to the BlackVue Power Magic Ultra Battery B-124E and is manufactured by the same manufacturer.
HARDWIRE CONNECTION
The advanced Cellink Neo 80+s 100Wh can be connected directly to a switched fuse or other power point in the car so that it is only charged whilst driving. After switching off the car’s ignition (and thus cutting the power supply to the Cellink), the Cellink will automatically supply power to the dashcam along with a signal indicating that the parking mode on the dashcam can be activated. This means you no longer have to worry about it at all.
To transmit the signal to the dashcam, the Cellink Neo80+s comes with a special 3-wire output cable. You connect the 3-wire hardwire kit of your dashcam to this cable (which you would normally connect to the car’s fuse box).
PLUG & PLAY CONNECTION
At Allcam, we supply the Cellink Neo 80+s with a cigarette lighter charger and a female cigarette lighter socket. With the cigarette lighter charger, you can easily charge the Cellink whilst driving without connecting it to the fuse box. Please note that a full charge takes slightly longer using this method.
The female (output) cigarette lighter socket also allows you to connect the dashcam’s cigarette lighter power supply to the Cellink for easier installation. Please note that with this connection, the parking mode will not work on most dashcams. The parking mode will only work on dashcams with a software-based (visual) parking mode. Connection via the 3-wire hardwire kit is therefore recommended.
UP TO 30 HOURS OF POWER*
The Cellink Neo 80+s charges within 50 minutes whilst driving (with hardwire power supply) and then provides up to 30 hours of power to the dashcam without further draining the car’s battery. Once the Cellink is empty, the dashcam will switch off and will not drain the car’s battery any further.
* Battery life can vary significantly depending on the dashcam model. Dashcams with multiple active functions (Cloud, GPS, etc.), higher resolution or multiple cameras consume more power, and battery life may then be reduced to around 10 hours.
Original: $427.65
-65%$427.65
$149.68Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
CELLINK NEO 80+S
Smart Power Control with LiFePO4 Technology
The Ultimate Supplementary Dash Cam Power Source
This Cellink Neo 80+s 100Wh is Cellink’s latest dashcam power bank. It has been specially designed to allow you to use your dashcam’s parking mode without draining the car’s battery. The Neo80+s has a capacity of 100Wh and, thanks to its slim design, can be neatly concealed in almost any car. It is also equipped with Bluetooth, allowing you to easily connect via your phone to view the remaining capacity and other information.
The Cellink Neo 80+s comes with all the necessary accessories to have it professionally installed and integrated into the vehicle. The Cellink Neo 80+s 100Wh is made from durable materials and has a sturdy aluminium casing that can withstand knocks and temperature fluctuations. This Cellink Neo 80+s is the universal alternative to the BlackVue Power Magic Ultra Battery B-124E and is manufactured by the same manufacturer.
HARDWIRE CONNECTION
The advanced Cellink Neo 80+s 100Wh can be connected directly to a switched fuse or other power point in the car so that it is only charged whilst driving. After switching off the car’s ignition (and thus cutting the power supply to the Cellink), the Cellink will automatically supply power to the dashcam along with a signal indicating that the parking mode on the dashcam can be activated. This means you no longer have to worry about it at all.
To transmit the signal to the dashcam, the Cellink Neo80+s comes with a special 3-wire output cable. You connect the 3-wire hardwire kit of your dashcam to this cable (which you would normally connect to the car’s fuse box).
PLUG & PLAY CONNECTION
At Allcam, we supply the Cellink Neo 80+s with a cigarette lighter charger and a female cigarette lighter socket. With the cigarette lighter charger, you can easily charge the Cellink whilst driving without connecting it to the fuse box. Please note that a full charge takes slightly longer using this method.
The female (output) cigarette lighter socket also allows you to connect the dashcam’s cigarette lighter power supply to the Cellink for easier installation. Please note that with this connection, the parking mode will not work on most dashcams. The parking mode will only work on dashcams with a software-based (visual) parking mode. Connection via the 3-wire hardwire kit is therefore recommended.
UP TO 30 HOURS OF POWER*
The Cellink Neo 80+s charges within 50 minutes whilst driving (with hardwire power supply) and then provides up to 30 hours of power to the dashcam without further draining the car’s battery. Once the Cellink is empty, the dashcam will switch off and will not drain the car’s battery any further.
* Battery life can vary significantly depending on the dashcam model. Dashcams with multiple active functions (Cloud, GPS, etc.), higher resolution or multiple cameras consume more power, and battery life may then be reduced to around 10 hours.
